Wera Kraftform Kompakt Kits-Giving Trades the Tools They Want +Wera Kraftform Competition!

Aimed at: Pros who value convience and space saving, but also a comprehensive range of combinations of tools.

Pros: Neatly packed, high quality kits with all the Wera Virtues.

Wera are in continuous dialogue with UK tradespeople, and have found many create their own customised kits from the wide Wera range. To begin with they would buy the nearest Kompakt kit to the one required - meaning they sometimes had items they didn’t need, but also couldn’t fit other products that they did need into the pouch. 

So Wera took on the challenge of creating kits specifically tailored to end-users. The PlumbKit, was first, and was soon followed by kits designed for those working with metal and wood, and those are the two I am reviewing today.

Both of the kits in this review are presented in the new style of black card boxes that ooze quality and style to end-users. The usual Wera attention to detail is noted by the fact that the boxes have a pull out plastic tab so that they can be hung on a standard display stand.

The new style nylon wallets have rigid sides and each tool has a place. Users can therefore easily keep track of their tools and ensure that they don’t get left behind or lost. The wallets fold flat and are kept tightly closed with a hook and loop strip, so are handy to carry onto site and lay out flat when in use.

Time to examine the Kompakt Woodwork and Metalworking kits in detail, in order to fully appreciate their features.

The Metalworking kit has a smart little logo of an RSJ on the front to identify it and consists of 40 individual pieces that are logically grouped for easy location.

Right on the edge of the kit by the hook and loop strip is the useful voltage tester screwdriver. This has its own set of instruction attached to the removable pocket clip and is a useful safety item for metal workers working on electrical installations.

In my view the key piece of the kit is the now famous Zyklop Speed ratchet. It is so versatile and I can remember how many times it has got me out of trouble. It has a tiny 5-degree ratchet so it is possible to tighten up nuts in tiny spaces, the head can be angled and also used at 90 degrees like a screwdriver, AND it even has a rotating plastic screwsleeve on the shaft. I appreciate its virtues almost every time I use it.

To complement the Zyklop there are a long (150mm) and short (55mm) extensions and eight sockets ranging from 5.5mm to 13mm that cover the range of most commonly used sizes. A Rapidaptor bit holder accessory with a hex end can be fitted to the Zyklop so that screwdriving bits can be used.

On the other side of the wallet is a range of thirteen 90mm long screwdriving bits. There are 5 Torx bits, 3 Phillips bits, 4 hex bits and a slot screwdriver. Useful too, and I use mine often, is the screwholder. This slides over the shaft of a driver and the two flexible wings are used to hold screws in place as you manoeuvre them into position in tight spaces using only one hand. To drive the bits, the classic Kraftform screwdriver handle is supplied. This has a quick release Rapidaptor chuck that Wera users are familiar with.

However, to really underline that this is a metalworker’s kit the last pieces of this kit are 6 drill bits and 6 screw taps designed to complement each other in sizes. They are quite short and are clearly meant for use in thinnish sheet material. They can also be used to clear and redefine worn screw threads in rather overworn installations and can be driven with a cordless drill, the Zyklop or the Kraftform handle.  

I really like the way that each bit or socket has been etched with its size and designation and diameter where needed. It really helps keep track of the pieces as well as allowing you to keep order in the kit.

The Woodworking kit is identified by a logo of a plank of wood on the front and it consists of 41 pieces. Inevitably there is the electrical current tester that seems to be a reminder to woodworkers that they too need to be aware of electrical current where they might be working. The screwholder is a useful addition too.  

The kit concentrates largely on screwdriving and drilling, as we would expect. So there is a choice of sixteen 90mm long driver bits. There are 5 Torx bits – now very commonly used as a way of driving woodscrews and a necessary inclusion in my view. Four hex bits are also needed because they are often used in window installations. Of course you will also use the three Pozi bits (1,2 and 3) and the three Phillips bits (1,2 and 3) as well as a slotted driver bit almost every day.

 A set of 5 brad pointed drill bits has hex shanks that will fit a Rapidaptor or a drill chuck. They are genuinely sharp and cut nicely defined holes in wood very quickly.

On the other flap of the kit is a large Kraftform handle with a difference – it has a ratchet on the bottom of the handle as well as the customary Rapidaptor chuck. I like this handle because it is big enough to provide a solid grip for a maximum torque drive and the ratchet is easy to operate between thumb and forefinger.

Further driving flexibility is provided by a set of six smaller 25mm long drivers, and an extension holder. 

A set of seven sockets is placed along the spine of the wallet and these can be driven either by the Zyklop Mini bit ratchet and its 75mm long extension or the small 25mm long extension that will fit into the Kraftform handle. I never cease to be amazed at just how flexibly all these components can be made to work together and they will surely add versatility to the kit of any tradesperson.

I’ve always liked Wera Kompakt sets, both for use in the workshop and on site. They save on toolbox space, are easy to carry to the job and I can personally vouch for how many times the kit combinations have got me out of trouble. So taking these to the next level, with these tailored Trade Kits including a wider range of Wera products, is a welcome development.

For a chance to win any one of the four Wera kits reviewed in December/ January and February editions of ToolBusiness and Hire, send us an email  saying which kit you would like and why. The editor’s choice is final and your reasons may be published! 

To find out more about Wera Products, please visit www.wera-tools.co.uk

Wera Wera Kraftform Kraftform Kompakt Hand Tools Peter Brett Product Reviews
Scroll to Top