WERA BiTorsion and BitBoxes - Long Live the Evolution at Wera

 

WHY BUY?

  • Top quality
  • Made for different driving jobs – you choose
  • New bitboxes
  • Impact proof is a safety feature.
  • Better screwdriving performance

I am sure that many users, including myself, have used ‘standard’ Pozi and Torx drive bits available in bulk boxes at your local trade outlet, for many common tasks. We use them, they last as long as they last, and then you replace them and that is probably as much thought that most give to the problem.

However, I have long been aware that some driver bits are better than others – ever since I lent a set of Wera bits to two tradesmen I shall call ‘Bodgit and Leggit’, who had a reputation for breaking almost any tool they ever used. Not only did I get the bit set back, but they had only used one bit each. The secret lay in the special diamond coating on the bit flanges that not even they managed to break.  Some of the new bits I was sent for review use the same idea – so time for a close examination.

The Products

The box of ‘standard’ Pozi 2 bits are the ones that most trades would use in non-demanding screwdriving tasks and this is reflected in the price. However, the genuine Pozidriv profile and manufacturing techniques ensure much better than usual bit life.

Within the selection and going up a grade or two in the Pozi series are the Pozi 2 gold extra hard bits (BTH). The Bitbox notes the size clearly but also adds that these bits are extra hard (through hardened) and use the Take it Easy tool finder system for easy identification (black/Pozi; red/Phillips; green/Torx, yellow/slotted and blue/hex). Accordingly, each Pozi bit has a black band around the shank with a couple of white ‘2s’ on, so even without my glasses I could identify them easily. But the story doesn’t end here. Each bit has the Bitorsion feature on it. This means that the bits will respond to sharp inputs of torque by slightly flexing in the middle, and thus help to reduce breaking strains on the flanges. Since the bit is made to a harder Rockwell measure it is also better suited to the stresses put on it through typical timber applications using drill/drivers providing longer life.

It is a similar story on some of the other bits I looked at. For example, the box of size 25 Torx bits are marked with a green band bearing 25 around the shank. The box also tells me that they use the diamond gripping solution I mentioned before. If you run a fingernail through one of the Torx slots, you will feel the slight abrasion provided by the diamond coating that ensures long lasting grip on the fixing by eliminating cam-out. The bits are also labelled ‘impact proof’ – so users know exactly what they are to be used for.

The Bitholders are Important too

Included in the samples were four bit holders designed to work with the range of Wera bits for maximum performance, safety and longevity.

The first is a basic Rapidaptor bitholder. About 50mm long, that is perfectly suited to less demanding driving tasks. Its USP is its complete ease of use – simply push a standard hex bit into the chuck and it clamps it tight. With a single push upwards of the rotatable collar it ejects them just as easily. In my experience, a much better solution than straight bit holders.

More sophisticated is the longer Rapidaptor bitholder, with the Bitorsion feature built into the holder underneath the outer sleeve of the holder. Once again, this absorbs the extra torsion shocks of some of the powerful drill/drivers used nowadays. Some drivers boast torque ratings of over 135Nm – so you can understand the need for Bitorsion technology. Used with a Bitorsion bit there are a couple of extra layers of torsion safety.

The Ultimates

What every regular user of impact drivers should consider are either the Wera Impaktor, or Impaktor with Ringmagnet bitholders. These are labelled as impact proof and just looking at the build quality might convince you of that. They both use Bitorsion technology and have magnets to hold the bits into place. The Ringmagnet version has a magnetic collar as well and is a great way to hold screws ready for driving, as the magnet is genuinely powerful enough to hold a 75mm screw securely as you lift it to the workpiece.

Aimed at: Pros and amateurs who appreciate high quality

Pros: High quality bits and adaptors made to withstand the torques and impacts of modern screwdriving. Make sure you choose the one best for the job.

Scroll to Top